WAN Interface Setup

WAN Interface Setup

This page is used to configure the parameters for Internet network which connects to the WAN port of your Access Point. Here you may change the access method to static IP, DHCP, PPPoE or PPTP by click the item value of WAN Access type.

WAN Access Type:

IP Address:

Subnet Mask:

Default Gateway:

MTU Size: (1400-1500 bytes)

Host Name:

MTU Size: (1400-1492 bytes)

User Name:

Password:

Service Name:

Connection Type:

Idle Time: (1-1000 minutes)

MTU Size: (1360-1492 bytes)

IP Address:

Subnet Mask:

Server IP Address:

User Name:

Password:

MTU Size: (1400-1460 bytes)

  Request MPPE Encryption

Attain DNS Automatically

Set DNS Manually

   DNS 1:

   DNS 2:

   DNS 3:

Clone MAC Address:

  Enable uPNP

  Enable Ping Access on WAN

  Enable Web Server Access on WAN

  Enable IPsec pass through on VPN connection

  Enable PPTP pass through on VPN connection

  Enable L2TP pass through on VPN connection

  Set TTL Value (1-128)

IP Address:
Subnet Mask:
Default Gateway:
MTU Size:	(1400-1500 bytes)

User Name:
Password:
Service Name:
Connection Type:
Idle Time:	(1-1000 minutes)
MTU Size:	(1360-1492 bytes)

IP Address:
Subnet Mask:
Server IP Address:
User Name:
Password:
MTU Size:	(1400-1460 bytes)
Request MPPE Encryption

Clone MAC Address:
Enable uPNP
Enable Ping Access on WAN
Enable Web Server Access on WAN
Enable IPsec pass through on VPN connection
Enable PPTP pass through on VPN connection
Enable L2TP pass through on VPN connection
Set TTL Value	(1-128)